not working g400p+a800p+chan-extra

Hi,
Sorry, the chan-extra is not support dahdi_genconf to config the channels now, you shoud config it manually, please refer the user manual!

Thanks svolta for your help,

I finally intalled both cards and those are woking now, but there is an strange bug when I restart the server (using reboot at the command line).

When I start the server, the G400P is able to get up all the span with GSM SIM card (I am using one so far), but when I reboot the server, It is not able to get up the Spans, so I have to halt the system and start again.

gsm show spans output when I start the server

VOIPGSM*CLI> gsm show span 1
D-channel: 2
Status: Provisioned, Up, Active
Switchtype: SimCom 100/300
Type: CPE
Network Status: Roaming Net
Network Name: 123
Net Coverage (0,31): 14


gsm show spans output when I reboot the server

VOIPGSM*CLI> gsm show span 1
D-channel: 2
Status: Provisioned, Down, Active
Switchtype: SimCom 100/300
Type: CPE
Network Status: Unregistered
Network Name:
Net Coverage (0,31): -1


Do you know what can be happening here?

Hi,
Please modify /var/lib/asterisk/bin/freepbx_engine , find:
/usr/sbin/safe_asterisk -U asterisk -G $AMPASTERISKGROUP
and nodify it to:
#/usr/sbin/safe_asterisk -U asterisk -G $AMPASTERISKGROUP
/usr/sbin/safe_asterisk

Hi svolta,

I did what you said but it didn't fixed the problem, there is another way to fixed it?

I don't know if this can help but this is my diff file when I dmesg both output:

After halt:
dmesg > halted

After rebooting:
dmesg > rebooted

====================================================

diff halted rebooted
64c64
< Detected 1866.792 MHz processor.
---
> Detected 1866.855 MHz processor.
79c79
< Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.58 BogoMIPS (lpj=1866792)
---
> Calibrating delay loop (skipped), value calculated using timer frequency.. 3733.71 BogoMIPS (lpj=1866855)
105c105
< Calibrating delay using timer specific routine.. 3882.27 BogoMIPS (lpj=1941135)
---
> Calibrating delay using timer specific routine.. 3732.96 BogoMIPS (lpj=1866481)
117c117
< Total of 2 processors activated (7615.85 BogoMIPS).
---
> Total of 2 processors activated (7466.67 BogoMIPS).
130c130
< migration_cost=28
---
> migration_cost=23
211c211
< type=2000 audit(1287568626.833:1): initialized
---
> type=2000 audit(1287568431.794:1): initialized
273a274
> Time: tsc clocksource has been installed.
276d276
< Time: tsc clocksource has been installed.
369c369
< type=1404 audit(1287568654.360:2): selinux=0 auid=4294967295 ses=4294967295
---
> type=1404 audit(1287568459.334:2): selinux=0 auid=4294967295 ses=4294967295
371,374c371,372
< e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3
< e1000e: Copyright (c) 1999-2008 Intel Corporation.
< ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
< PCI: Setting latency timer of device 0000:04:00.0 to 64
---
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
376a375
> ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 19 (level, low) -> IRQ 50
379,386c378,379
< Floppy drive(s): fd0 is 1.44M
< eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:2a:fc:3c
< eth0: Intel(R) PRO/1000 Network Connection
< eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
< FDC 0 is a post-1991 82077
< ACPI: PCI Interrupt 0000:00:1f.3 -> GSI 19 (level, low) -> IRQ 50
< ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 74
< Found an OpenVox G400P: Version 0.f3b2
---
> ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 21 (level, low) -> IRQ 66
> Found an OpenVox G400P: Version 0.f364
391a385,386
> e1000e: Intel(R) PRO/1000 Network Driver - 1.0.2-k3
> e1000e: Copyright (c) 1999-2008 Intel Corporation.
394c389
< ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 82
---
> ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 74
395a391,395
> ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 17 (level, low) -> IRQ 177
> PCI: Setting latency timer of device 0000:04:00.0 to 64
> eth0: (PCI Express:2.5GB/s:Width x1) 00:19:d1:2a:fc:3c
> eth0: Intel(R) PRO/1000 Network Connection
> eth0: MAC: 2, PHY: 2, PBA No: ffffff-0ff
436c436
< buffer re-sync occur from -1 to 1
---
> buffer re-sync occur from -1 to 3

================================================
I appreciate your help.

Hi,
Please show me the output by command "dmesg |grep G400P"!

Hi,

After halt:
dmesg |grep G400P

Found an OpenVox G400P: Version 0.efad

====================

After reboot:
dmesg |grep G400P

Found an OpenVox G400P: Version 0.f1e3